How to use Philips Norelco Series 9000 – Beginner’s Guide, Tips & Techniques

Master your grooming routine with this step-by-step guide on using the Philips Norelco Series 9000 (BT9810/40) for a perfect, even trim every time.

I used to believe that it is pretty simple to trim a beard, and all you need to do is grab any trimmer in best beard trimmers, turn it on, and start munching your face. The result? Irregular lines, missed spots and a neck that resembled I had been mowed down by an electric lawn mower. I had upgraded to Philips Norelco Series 9000 that is supposed to provide the best performance but even, I was not getting the results that I desired.

It is then that I understood Philips Norelco Series 9000: It is not only about having a high-quality trimmer. It is all about using it correctly. Provided that your error is the same as mine, the article will teach you the correct way of using it. I am going to share all the difficult learned tricks that I wish I knew in the beginning.

Discover the Philips Norelco 9000 (BT9810/40)

It is important to learn about the tool you are about to jump into. The Philips Norelco Series 9000 (BT9810/40) is not a simple beard trimmer. It has a precision zoom wheel, 30 length settings, self sharpening steel blades and a powerful lithium-ion battery, Beard Sense Technology. The trimmer automatically balances the amount of power.

It delivers to the beard depending upon the density of the beard; it is also fitted with an integrated length dial- with the range being 0.4 mm to 10mm. As soon as you understand its main functions, you will realize how effective this device can be. The knowledge of each of these capabilities will allow you not to underuse such a premium tool.

Charge Your Trimmer Before First Use

The Philips Norelco Series 9000 may be charged to some extent out of the box, but do not take chances and start your first trim with low power. Connect it to the power and charge it up, which should take approximately 1 hour to fully charge it and have 120 minutes of cordless use. It has an LED indicator that informs you when it is ready.

It is not only better to charge it to the full capacity to make sure that it will never get you in the middle of a trim, but it will also extend the battery life in the long term. When it is fully charged, it provides you with power to last through a number of grooming sessions. You will soon discover that half-charged trimmer will result in half-hearted work.

How to Select the Right Length Setting

The most noticeable thing in Philips Norelco Series 9000 is its zoom wheel, using which you can fix the desired length of your hair. You may set it between 0.4mm and 10mm in 0.2mm steps. No matter what length you want to achieve, whether it is light stubble, a close fade, or a medium beard, there is a setting. I tend to leave the cheeks at 2.0 mm and edges at 1.0 mm. Locating the perfect environment will guarantee a more personalized and uniform appearance each time. Take some time and trial and error the best applications on each part of your face.

Clean Your Beard Before Trimming

And never cut on a dirty or dirty beard. Clean your face and beard with warm water and mild soap. Dry with a towel, but trim when dry. Hair that is wet is flat and may result in incorrect cuts. Clean hair can be worked upon easily and can be trimmed accurately. A little time spent on preparation means that you will not get uneven results.

Start with Grain Length, Shape Against It

When you are trimming, you should always start with the grain ( the direction your hair grows). This assists in eliminating length in a more regulated manner. Then, go granny when you want a sharper, nearer cut. The Philips Norelco Series 9000 moves smoothly in both directions but this two-pass system will enable you to obtain both the volume control and edge sharpness. Be patient with each pass and this will enhance the overall shape of the beard. Do not hurry up this process; this is where the accuracy really counts.

Detail with the Trimmer’s Edge

The shape of the blade is one of the reasons I love this trimmer- it enables unimaginable precision when it comes to lines. With the sharp ends of the blade (no guard) mark your neckline, cheek lines, mustache region. Don t hurry here. It is preferable to make light strokes and look at the mirror regularly than to do too much and regret. It is in the detailing that you actually give your beard the final form. Just a couple of additional minutes can make your whole appearance better.

Quick Clean with the Cleaning Brush

After you have finished trimming, clean the hair caught between blades using the cleaning brush provided. It is a minor step but a big step towards preserving blade sharpness and hygiene. The blades can be cleaned, however, do not put the whole thing under running water unless it is waterproof. In this model, use dry brushing or simply take out the head to wash it under the running water. Cleaning on a regular basis guarantees a long-term performance. Failure to do this may result in blunt knives and reduced cutting ability.

Keep Blades Oiled for Smooth Trimming

Although the Series Philips Norelco Series 9000 does not need to be oiled every day, it is recommended to put a drop of oil on the blades once a week to extend their life. Simply add a drop of clipper oil and turn the trimmer on 10-15 seconds to distribute it. This keeps the blades moving freely and it does not build up or rust with time. Oiling on a regular basis makes the trimming experience smooth always. Lubricating the blades minimizes friction, and it increases the overall life of the trimmer.

Sharp Settings for Neckline and Mustache

In trimming mustaches, shorten the setting length and apply short concentrated strokes. The precision dial enables you to adjust to the required mm without interchanging attachments. With no guard, I set the shaver to the 0.4mm to give me a clean shave line on the neckline. In case you want to fade it into your neck, then start with low settings and move downwards. Pure lines change a lot in appearance. Symmetry is an aspect that takes your grooming skills a notch higher here.

Keep Your Trimmer Safe and Clean

Once cleaned, dry your trimmer and put it in a secure dry location. Do not put it in a drawer to get scratched or dropped. In case you travel frequently, then invest in a protective case. By maintaining it clean and safe, one will be able to keep it in the best shape possible over a long period of time. Good storage habits go with a good tool. Adequate storage will minimize the possibility of accidentally damaging your trimmer and will preserve the appearance of it.

Stay Sharp – Apply It Every Day

The more regular your trimming sessions the less painful they will become. I also cut my beard every 3-4 days in order to have it sharp and easy to handle. After establishing a routine, you will realize your trims are faster and efficient. You also get a better feel of how your beard grows with regular usage, and you can tweak your grooming strategy, as time goes. It will be easy to keep your appearance. Practice makes precision just like anything.

Beard Trimmer Maintenance Tips

Maintaining your Philips Norelco Series 9000 is as vital as the proper use. Never leave hair in the blades after use, brush out. Apply oil on the blades once per week to ensure smooth operation and high durability. Store it somewhere dry and not in contact with water and moisture, ideally in a pouch or a case. Recharge the device frequently and never forget to leave it without charge for long hours. Some minutes of attention will ensure that your trimmer lasts many years in the same condition.

When the trimming is uneven or you are experiencing pulling then replace the blade head. To prevent accumulation of dust and skin oil, clean the trimmer body using a soft and dry cloth. Be sure to read the user manual to see whether there are any special care instructions according to your model. A small pouch or box will assist in storing all your attachments in a single place and organized.

FAQs About How to use Philips Norelco Series 9000

Final Thoughts

The correct use of the Philips Norelco Series 9000 (BT9810/40) has fully changed my grooming routine. No more hasty shaves, no more length estimations and certainly not more patchy beard fiascos. A good technique and a little bit of attention will help you to get a professional level of results with the help of this trimmer right in your bathroom. All trims are more controlled, more efficient and more gratifying. In case you already own this trimmer (or are considering purchasing it), then you should know that it is well worth it. All you need to do is to treat it as a precision instrument. Believe me, your beard will be grateful.